| Pentel
Net Internet Setting
Dialup
and PPPoE Setup
Welcome
and thank you for purchasing Pentel Net High Speed
DSL. This service allows you to access the internet
without the need of an additional phone line.
PPPoE
Setup Instructions
Pentel Net uses PPP over Ethernet (PPPoE) as the
connection method. PPPoE is essentially the same
as a PPP dialup connection, but instead of using
a dialup modem, the connection goes over an Ethernet
or USB connection to your broadband modem.
You
need to register for a Pentel net connection account.
If you haven't done so yet, contact Pentel Net
at 231-223-4210.
Windows 2000, XP,
Vista & Mac OS X Setup Instructions
Windows
2000
Windows XP
Windows Vista
To enable PPPoE to automatically connect on startup,
click here
Mac OS X
Instructions available here
All other versions of Windows (Windows 95, Windows
98 & Windows 98SE & Windows ME)
Other versions of windows require the use of software
called RASPPPOE.
Router Setup Instrutions
If you have a Router connected directly to your
modem, please select your router below:
Netgear RP114 Click here
Netgear RP614 Click here
Netgear WGR614 Click here
Linksys RT31P2 Click here
Linksys WRT54GP2 Click here
If your router is not listed above, the generic
settings are provided below:
Connection Type: ‘Dynamic IP Address that
uses a Username & Password’ or ‘PPPoE’
Username: First part of your full primary email
address, i.e. user @pentel.net
Password: Your password
Domain (or Realm): Leave blank
Idle Timeout: 0
2008© Pentel.net. All Rights Reserved
|
